IBOP Lower OEM Ref 114706 | Evergrow Part Nos 172059 for TDS11SA and TDS9SA Top Drive Systems

A reliable top drive system is essential to efficient drilling operations, but maintaining the equipment requires attention to many individual components. Among them, the Internal Blowout Preventer (IBOP) assembly is an important part of the well-control equipment associated with the pipe handler of top drive system.

The IBOP Lower OEM Ref# 114706-500, 114706-502 supplied by Evergrow as Part# 172059-500, 172059-502 is a replacement component for compatible TDS-11SA and TDS-9SA top drive systems.

For drilling contractors and oilfield service companies, maintaining a reliable inventory of critical top drive spare parts can help simplify maintenance planning and reduce delays when equipment requires repair or overhaul.

Evergrow supplies replacement top drive components to customers worldwide, supporting drilling equipment maintenance, repair, and refurbishment requirements.

Product Information

Please confirm the OEM reference number and top drive model before ordering to ensure the correct replacement part is supplied.

Understanding the Lower IBOP

An Lowe IBOP is a manual internal blowout precenter of the well-control equipment used in top drive drilling systems. Its function is associated with controlling the flow path through the drill string when required during drilling operations.

There are two types of Lower IBOP, one is for regular fluid with OEM part number 114706-500, the other is for H2S environment with OEM part number 114706-502.

The IBOP assembly consists of repair kits that work together as part of the internal flow-control system. The Lower IBOP 114706 is an important component within this arrangement and should be maintained according to the applicable equipment maintenance requirements.

In demanding oil and gas drilling environments, IBOP components may be exposed to drilling fluid, pressure, vibration, and mechanical stresses. Proper inspection and maintenance therefore play an important role in supporting reliable equipment operation.

IBOP Lower for TDS-11SA and TDS-9SA

The TDS-11SA and TDS-9SA top drive systems are used in demanding drilling applications where equipment reliability and maintenance planning are important.

For companies operating and maintaining these systems, the availability of the correct replacement components can help improve maintenance efficiency.

The IBOP Lower OEM Ref# 114706-500, corresponding to Evergrow Part# 172059-500, is supplied for compatible TDS-11SA and TDS-9SA top drive applications.

This replacement part may be considered for:

· Scheduled equipment maintenance

· Top drive overhaul projects

· Preventive maintenance programs

· Drilling rig refurbishment

· Replacement of worn or damaged components

· Equipment repair

· Spare parts inventory preparation

Before ordering, customers should confirm the part number and equipment configuration to ensure compatibility.

The Role of the Lower IBOP in the Top Drive Assembly

The IBOP system forms part of the equipment used to manage internal flow through the drill string during drilling operations.

The lower IBOP works within the overall IBOP arrangement and contributes to the integrity and functionality of the system.

For drilling contractors, the condition of the IBOP assembly should be considered as part of a broader top drive maintenance program.

A well-maintained IBOP system can help support:

· Equipment readiness

· Reliable drilling operations

· Effective maintenance planning

· Reduced risk of unexpected downtime

· Improved reliability of critical top drive components

The exact operating procedures and maintenance requirements should always follow the applicable equipment documentation and site-specific well-control procedures.

Inspection Points for IBOP Lower Components

Like other critical drilling equipment components, the Lower IBOP should be inspected according to the applicable maintenance schedule and operating requirements.

Depending on the equipment and service conditions, maintenance personnel may check for:

· Excessive surface wear

· Damage caused by drilling fluids

· Sealing surface deterioration

· Connection or thread damage

· Abnormal leakage

· Signs of mechanical damage

The inspection process should be performed by qualified personnel using the appropriate procedures and equipment specifications.

If a component is found to be damaged or outside acceptable service limits, replacement should be considered in accordance with the manufacturer's recommendations.

When to Consider Replacing the IBOP Lower

The service life of an IBOP component can vary depending on operating conditions, maintenance practices, drilling hours, and the specific application.

Rather than relying only on a fixed replacement schedule, maintenance teams should follow the applicable inspection and maintenance procedures for the equipment.

The IBOP Lower OEM Ref# 114706-500 may be considered when:

· The existing component shows excessive wear

· Damage is identified during inspection

· The equipment is undergoing a major overhaul

· A top drive is being refurbished

· A replacement is required after abnormal operating conditions

· A drilling contractor wants to maintain critical spare parts in stock

Advance spare parts planning can be especially useful for drilling operations where equipment downtime can have a significant impact on project schedules.

Why Choose Evergrow IBOP Lower Part# 172059-500?

Evergrow supplies the IBOP Lower Part# 172059-500, and 172059-502 corresponding to OEM Ref# 114706-500, 114706-502 for customers maintaining compatible TDS-11SA and TDS-9SA top drive equipment.

Easy Part Identification

The OEM and Evergrow reference numbers provide a convenient way for customers to identify the required component.

Suitable for Maintenance and Overhaul

The part can be supplied for equipment repair, planned maintenance, and top drive overhaul projects.

Support for Spare Parts Planning

Keeping commonly required components available can help maintenance teams respond more quickly to equipment requirements.

International Supply

Evergrow serves customers in the international oil and gas industry and supports worldwide spare parts requirements.

Professional Service

Our team can assist customers with product identification, quotations, and shipping arrangements based on their requirements.

Evergrow Top Drive Spare Parts for TDS-11SA and TDS-9SA

Evergrow provides a range of replacement parts for top drive systems and drilling equipment.

Our product range includes:

· IBOP Assembly Upper

· IBOP Lower Assy

· Wash pipe assemblies 30123290

· Wash pipe tube and seal kits

· Bearing isolators

· Brake caliper discs

· Cylinders

· Cranks

· Seals and sealing components

· Other top drive spare parts

For customers operating TDS-11SA and TDS-9SA top drive systems, Evergrow can support spare parts sourcing for routine maintenance, repairs, and equipment overhaul projects.

How to Order IBOP Lower

If you require IBOP Lower OEM Ref# 114706-500 or 114706-502 or Evergrow Part# 172059-500 or 172059-502, please contact our sales team.

When sending an inquiry, we recommend providing:

· OEM reference number

· Evergrow part number

· Top drive model

· Equipment serial number, if available

· Required quantity

· Delivery destination

Providing these details helps our team identify your requirements and prepare a quotation more efficiently.

Contact Evergrow

For inquiries about  IBOP Lower OEM Ref# 114706-500 or 114706-502 or other TDS-11SA and TDS-9SA top drive spare parts, please contact us:

Email: sales@linhaievergrow.com

Tel./WhatsApp: +86 189 9192 9885

Evergrow — Your reliable partner for top drive spare parts, centrifugal pumps and parts and oilfield drilling equipment components.

We welcome your inquiries and look forward to supporting your drilling equipment maintenance and spare parts requirements.