Comprehensive Inspection Guide for PIPE HANDLER

For the 30178847 PIPE HANDLER on the TDS11SA top drive, the following are the general inspection steps that may be involved:

1 Appearance inspection:

Inspect the appearance of the PIPE HANDLER to ensure that there is no obvious damage or deformation.

Inspect the welding points and joints to ensure that they are strong and free of cracks.

2 Functional inspection:

Inspect the various operating parts of the PIPE HANDLER, such as clamps, control buttons, etc., to ensure that they function properly.

Test the clamping force of the clamp and ensure that the clamp can clamp the pipe safely and reliably.

3 Lubrication inspection:

Ensure that all parts that need lubrication (such as sliding parts, bearings, etc.) have been properly lubricated.

Check the lubrication system to ensure that the lubricant is appropriate.

4 Electrical connection inspection:

Check the electrical connection of the PIPE HANDLER to ensure that the connection is firm and not damaged.

Ensure that the control system and sensor connections are normal.

5 Safety inspection:

Ensure that the safety devices of the PIPE HANDLER are intact, such as emergency stop buttons, limit switches, etc.

Check all safety guards to ensure the safety of operators and equipment.

PIN,HINGE           OEM #30178847         EVERGROW #60357694